Map layers: what plans, protected areas, Natura and the other layers show
Tonttikartta's map layers gather authorities' open data around a property. A layer tells you that something exists and roughly where. What it means for your particular plot is decided by the land-use plan, the authority's decision and the permit process. This guide goes through the layers group by group: what each shows, which law it rests on, and where to find the official information.
The map shows a feature; a decision gives it legal effect
Every layer is drawn from data an authority publishes, but a boundary on the map is not the legal boundary. A nature reserve's boundary and rules are in its establishment decision, a plan's legal effects are in the adopted plan documents, and the protected extent of an ancient monument is assessed by the heritage authority. The map helps you notice what to check.
An empty area on the map does not mean nothing is there. Data does not exist everywhere, and some layers appear only at certain zoom levels. Each layer's legend states its coverage.
Plan layers: regional, master, detailed and pending plans
Land use in Finland is steered by three levels of plan, set out in the Land Use Act. The regional council draws up the regional plan (maakuntakaava); the municipality draws up the master plan (yleiskaava) and the detailed plan (asemakaava). A higher plan guides the lower one, and the detailed plan steers building most directly.
- Regional plans: the regional councils' combined plan maps as an overview. They do not show a plot's building rights, and harmonised symbols can differ from the adopted maps.
- Detailed and master plans: the municipality's own current detailed plan map with its markings, and plan-area boundaries that lead to the plan's official documents.
- Pending plans: plans municipalities are preparing, by stage — for example the participation and assessment plan, the draft or the proposal. A pending plan is not yet in force.
Why plans are not shown everywhere
Each municipality keeps its plans in its own systems, and there is not yet one national open source for plan content. Tonttikartta shows a municipality's plan map and plan areas only where the municipality or the national data repository publishes them as open, machine-readable data. That is why coverage varies by municipality and is best in the large cities.
A national solution is being built. The Act on the Built Environment Information System created Ryhti, maintained by the Finnish Environment Institute (Syke), to which municipalities must deliver plan data after a transition period. Syke states that new plans will be in the data nationwide from 1 January 2029; older plans are included only if a municipality delivers them itself. Ryhti's open data currently holds plan boundaries and document links, not plan markings or building rights.
The map's Planning panel has a current list of the municipalities whose plans Tonttikartta shows and what is available for each. If a municipality is not on the list, check its own map service.
Nature reserves and Natura 2000
The nature protection layer shows, from Finnish Environment Institute data, state and private nature reserves, protected habitat types, protected species sites and Natura 2000 sites. They are governed by the Nature Conservation Act.
- National parks and strict nature reserves are state reserves where activity that alters nature is generally prohibited. The exceptions and access rules are in the site's founding statute and its rules.
- A private nature reserve's (YSA) boundaries and protection provisions are in its own establishment decision, and they differ from site to site.
- A protected habitat type is protected against deterioration. Some types are protected directly by the Act, others only once an authority has decided their boundary.
Natura 2000 is the European Union's network of protected sites. Being a Natura site does not by itself prohibit every activity, but a project or plan must not significantly deteriorate the natural values the site was selected for. A project or plan likely to cause such significant harm must have its effects assessed (Nature Conservation Act section 35). The same applies to a project outside the site whose significant harmful effects are likely to reach it.
Flood risk areas
The flood layer shows areas identified in flood risk management under the Flood Risk Management Act. A significant flood risk area is a broad area where a flood could cause significant damage. Its boundary is not a flood extent or depth map, and it does not by itself restrict building on a plot.
A plot's flood hazard depends on the probability and depth of flooding at that spot, the building's elevation and the municipality's requirements. These appear on the authorities' flood hazard maps and in the municipal plan.
Cultural environment: ancient monuments, RKY areas and protected buildings
A fixed ancient monument is protected directly by the Antiquities Act, without a separate decision. Excavating, covering, altering or otherwise interfering with it is prohibited without a permit under the Act. Protection also covers the monument's protective zone. Where the Finnish Heritage Agency has not confirmed its boundaries, the zone extends two metres from the visible outer edges (section 5). The mapped outline is indicative.
Nationally significant built cultural environments (RKY) are an inventory by the Finnish Heritage Agency. It is taken into account in land-use planning through the national land-use objectives, but it is not itself a building ban. The practical rules come from the plan, a protection decision and the building permit.
A protected building may be protected by a plan or under the Act on the Protection of the Built Heritage. Demolition and alterations may then need a permit; ask the municipal building control and the regional museum before starting work.
Groundwater areas
Groundwater areas are mapped areas from Finnish Environment Institute data, classified under the Act on Water Resources and Marine Strategy Management:
- Class 1: a groundwater area important for water supply, whose water is used or intended for more than 10 cubic metres a day or for more than 50 people.
- Class 2: another groundwater area suitable for water supply.
- Class E: a groundwater area on which a surface-water or terrestrial ecosystem directly depends. It can be added to class 1 or 2, as in 1E.
The Environmental Protection Act's groundwater contamination ban prohibits activities that could change groundwater quality in an important or other water-supply groundwater area in a way that endangers or harms health or the environment. Activities in a groundwater area can therefore need a permit or studies, and the municipality's plan, building ordinance and environmental protection regulations may set their own rules for it.
Soil
The soil layer shows the Geological Survey of Finland's (GTK) surface ground types at a scale of 1:200,000, plus a more detailed soil map where one exists. The scale means the map is an overview: the ground on an individual plot can differ. Foundations are decided by ground investigations, whose locations are on their own layer.
Traffic noise
The noise layer shows road, rail and air traffic noise zones as decibel bands. They are modelled annual averages (Lden), with evening and night noise weighted, not measurements at the property. Under the Environmental Protection Act noise must be mapped for large urban areas and the busiest roads, railways and airports, so quieter routes usually have no zones.
A noise zone does not by itself restrict the use of a property, but building or planning may need a noise study and mitigation. Noise guideline values use a different quantity: the A-weighted equivalent level (LAeq) for daytime (7–22) and night (22–7). In areas used for housing the outdoor guideline is 55 dB by day and 50 dB at night; in new areas the night guideline is stricter, 45 dB. An Lden band therefore does not show directly whether a guideline is exceeded.
Other layers
- Aerial and historical aerial images are National Land Survey orthophotos; the older ones show how an area has changed.
- Elevation and 3D terrain come from the National Land Survey's elevation model, based on laser scanning.
- Population grid squares and postal areas are Statistics Finland open data.
- Construction projects come from permits that municipal building control reports to the Ryhti system; a reported stage can be out of date.
- Property identifiers are the National Land Survey's official identifiers from the cadastral index map.
The other guides cover property boundaries, parcels and area.
Law and sources
- Land Use Act 132/1999
- Act on the Built Environment Information System 431/2023
- Nature Conservation Act 9/2023
- Flood Risk Management Act 620/2010
- Antiquities Act 295/1963
- Act on the Protection of the Built Heritage 498/2010
- Act on Water Resources and Marine Strategy Management 1299/2004
- Environmental Protection Act 527/2014
- Government decision on noise guideline values 993/1992
- Environment administration: Natura 2000 sites
- Vesi.fi: flood maps
- Finnish Heritage Agency: cultural environment service window
- RKY – nationally significant built cultural environments
This guide is general information, not legal advice. Legal effects are decided by the authorities and the documents named in it; the links open the current consolidated law in Finlex.
Checked against the sources in October 2026
Guides
- Property boundaries: boundary markers, the map and boundary demarcation
- Parcel (palsta), property (kiinteistö), plot (tontti) and unseparated parcel (määräala): how they differ
- How to read a Finnish detailed plan: markings, building rights and validity
- Property area: the official register area and the area measured from the map
Beta · This experimental service may contain errors or interruptions. Verify important details with the original provider.