How to read a Finnish detailed plan: markings, building rights and validity
The detailed plan (asemakaava) decides what may be built on a plot. A plan consists of a map with markings and the regulations that explain them, and reading it takes a little practice. This guide explains which parts are binding, what the most common markings mean and how to tell whether a plan is in force.
Where the detailed plan sits among the plans
Under section 4 of the Land Use Act the master plan (yleiskaava) sets out the main features of land use in a municipality, and the detailed plan arranges the use and building of part of it. The regional plan is general and guides master and detailed planning (section 32); the master plan in turn guides detailed planning (section 42).
Building is bound directly by the detailed plan: nothing may be built contrary to it (section 58). The detailed plan is approved by the municipal council.
What in a plan is binding
A detailed plan consists of plan features and plan regulations (section 55). The plan map shows, for example, the boundaries of the plan and its sub-areas, their uses, the amount of building and the district and block numbers. The plan regulations (section 57) specify how the area may be used and built.
The plan comes with a report (kaavaselostus) setting out its aims, effects and the reasons for its solutions (section 55 a). The report helps you understand the plan, but building is steered by the plan map and regulations.
Always read the plan's own legend of markings and regulations. The same letter can mean slightly different things in plans of different ages, and a plan can carry regulations of its own.
The most common land-use markings
The established letter codes of the Ministry of the Environment's plan marking guide give a block's main use:
- AO – detached houses
- AP – low-rise housing (for example terraced and semi-detached houses)
- AK – blocks of flats
- AL – housing, commercial and office buildings
- C – town-centre functions
- P – service buildings
- Y – public buildings
- T – industrial and warehouse buildings
- VP – park and VL – local recreation area
- M – mainly agriculture and forestry
A Ministry of the Environment decree issued in 2024 sets a standard presentation of plan regulations and features for new plans in the data-model format. Older plans use the markings of their time, so check the meaning in the plan's own legend.
Building rights, floor area and storeys
Building rights are usually expressed as floor area (Building Act section 7). On the plan map they typically appear either as square metres of floor area (for example 250) or as an efficiency number (for example e = 0.25), the ratio of floor area to plot area. On a 1,000 m² plot, e = 0.25 means 250 m² of floor area.
Floor area (kerrosala) counts each storey measured to the outer face of the external walls (Building Act section 9). It is therefore not the same as living area, which is measured inside the walls.
A Roman numeral such as II gives the greatest permitted number of storeys. A fraction before or after it, as in ½ II or II ½, allows space in a basement or attic storey that counts towards floor area. The building area — the part of the plot where a building may stand — is outlined on the map with its own line.
Is the plan in force and up to date?
Only an approved plan that has entered into force binds; pending plans, drafts and proposals do not yet. Many municipalities publish their plans in force as a consolidated current detailed plan (ajantasa-asemakaava) that includes the amendments. You can check whether a plan is in force with the municipality's planning office or map service.
An old plan does not lapse by itself. If a detailed plan is more than 13 years old and largely unrealised, the municipality must assess whether it is up to date before granting a significant building permit there (section 60).
Plan data is being gathered into the national Ryhti information system maintained by the Finnish Environment Institute (Act on the Built Environment Information System).
Detailed plans on Tonttikartta
Tonttikartta's Planning layer shows the municipality's own current detailed plan map with its markings, and plan areas that lead to the plan's official documents, in the municipalities that publish them as open data. The map layers guide explains why not every municipality's plans are shown yet.
Law and sources
- Land Use Act 132/1999 (English, unofficial)
- Building Act 751/2023
- Ministry of the Environment decree on presenting plan regulations and features 311/2024
- Act on the Built Environment Information System 431/2023 (English, unofficial)
- Ministry of the Environment: Plan markings (guide, 2000)
English translations of Finnish laws in Finlex are unofficial; the Finnish and Swedish texts are authoritative.
This guide is general information, not legal advice. Legal effects are decided by the authorities and the documents named in it; the links open the current consolidated law in Finlex.
Checked against the sources in October 2026
Guides
- Property boundaries: boundary markers, the map and boundary demarcation
- Parcel (palsta), property (kiinteistö), plot (tontti) and unseparated parcel (määräala): how they differ
- Property area: the official register area and the area measured from the map
- Map layers: what plans, protected areas, Natura and the other layers show
Beta · This experimental service may contain errors or interruptions. Verify important details with the original provider.